ITAR
The ITAR stands for the International Traffic in Arms Regulations. This is a regulation that conveys the U.S. governments requirements for the export and temporary import of defense articles, data, and services. These regulations, administered by the Department of State’s Directorate of Defense Trade Controls (DDTC), are designed to protect national security and support U.S. foreign policy. These regulations are defined in 22 CFR § 120-130.
What the ITAR Regulates
ITAR applies to articles listed on the United States Munitions List (USML). This includes:
- Defense Hardware – Physical items with military applications, such as firearms, ammunition, aircraft, vehicles, explosives, military electronics, and spacecraft.
- Defense Services – Assistance, training, or technical expertise provided to foreign persons in connection with defense articles.
- Technical Data – Information like blueprints, diagrams, classified data, and software directly tied to defense articles.
A core rule is that USML articles can only be shared with “U.S. persons” unless authorized by the State Department. A “U.S. person” includes U.S. citizens, permanent residents (green card holders), certain protected individuals, and U.S.-incorporated entities.
It is important to note that while the ITAR only controls items that are specially designed for a military application, it is not the only set of export laws that may regulate military technology. The U.S. Department of Commerce’s Bureau of Industry and Security (BIS) also controls some military technologies in the Export Administration Regulations (EAR) in its Commerce Control List (CCL). The typical defense articles one may find in the CCL are minor military parts, components, attachments, and accessories. These regulations are defined in 15 CFR § 730-744.
For defense manufacturers, ITAR (and EAR) compliance is a legal obligation with strict enforcement. Violations can result in heavy fines, criminal penalties, and bans from future defense contracts. Key areas of impact include:
- Registration and Licensing
- Companies that manufacture, export, or broker defense articles or services must register with the DDTC.
- Manufacturers of ITAR hardware are required to register even if they do not export.
- Registration is also a requirement for applying for export licenses, which are often needed for international transactions.
- Access Controls / Internal Control Program
- Only authorized “U.S. persons” may access ITAR-controlled items and data.
- Manufacturers often establish restricted “ITAR zones,” enforce strong cybersecurity protections, and vet employees and subcontractors.
- Global workforces and international partnerships make this especially challenging.
- Supply Chain Compliance
- ITAR obligations extend throughout the supply chain.
- Prime contractors are responsible for conveying compliance expectations to suppliers, subcontractors, and distributors.
- Non-compliance anywhere in the supply chain can expose the manufacturer or exporter to liability.
- Technical Data Management
- Types of controlled technical data can be broad. The ITAR defines technical data in 22 CFR § 120.33 as information “which is required for the design, development, production, manufacture, assembly, operation, repair, testing, maintenance, or modification of defense articles. This includes information in the form of blueprints, drawings, photographs, plans, instructions, or documentation.”
- Controlled data must be secured in physical areas and IT systems to prevent unauthorized non-US Person access.
- Sharing controlled data with a foreign national, even within the same company, is considered a “deemed export” and requires prior licensing.
In addition to looking at the regulations themselves, companies wanting to comply with the ITAR are encouraged to establish a program that incorporates the key elements found in DDTC’s published “Compliance Program Guidelines”. The key elements include:
- Management Commitment and Compliance Structure
- Registration, Classification and Export Authorizations
- Recordkeeping
- Export Violations
- Training
- Conducting Risk Assessments for Compliance Program Structuring
- Audits and Compliance Monitoring
- Compliance Manual and Associated Procedures
FOREIGN POLICIES
This is an ITAR exemption that is commonly referred to as the “AUKUS” exemption. AUKUS relates to a special partnership between U.S., United Kingdom, and Australia aimed at streamlining defense trade among these countries.
The exemption covers certain exports, re-exports, and re-transfers of defense articles between these countries without a license. The 126.7 exemption can only be used provided certain requirements are met. These are:
- Location: All activities must occur within the physical territories of the U.S. UK or Australia.
- Authorized Users: The entities involved must be specifically identified on the Authorized User List (“AUL”) on the DDTC (State) website licensing portal called the Defense Export Control and Compliance System (“DECCS”).
- Eligible Defense Article: The subject technology must not be listed as ineligible for transfer
- Limitations: Ensure that what is to be transferred under the AUKUS exemption does not exceed certain monetary limits and involve significant military equipment manufactured abroad.
No, unless there is a specific authorization to allow for the transfer. A Canadian citizen is considered to be a Non-US Person or Foreign National unless this person also has U.S. citizenship or is a Permanent Resident Alien (aka, “green card holder”). For all Foreign Nationals, access to ITAR technical data, whether in the U.S. or abroad, is prohibited unless there is an authorization such as an export license or exemption.
A common exemption used for the transfer of certain technologies is 22 CFR 126.5, or the “Canadian Exemption”. For a U.S. company to transfer ITAR technical data to a Canadian entity, strict requirements must be met. This includes:
- The US exporter must have a valid registration with DDTC
- The technical data must not be excluded per Supplement 1 to 126.5
- The Canadian recipient must be listed with the Canadian Controlled Goods Program
- The US exporter must obtain written assurances from the Canadian recipient
- Records must be kept for a minimum of five (5) years
Yes, if your role is to provide a defense service. ITAR regulates this activity, as it controls the export of defense-related products and services, including the provision of defense services by U.S. citizens to foreign entities. You would need to ensure compliance with ITAR requirements, which may include obtaining authorization (e.g., export license) from the U.S. government. The DDTC provides more details on their website.
If only unclassified technologies are involved, anyone that has a U.S citizenship is considered to be a U.S. Person. This is regardless of whether they have one or more citizenships of another country. Note that a U.S. Person is also someone who is a permanent resident alien or “protected individual”. These persons do not have U.S. citizenship, but for export control purposes under the ITAR and EAR, they are treated in the same way as if they are a U.S. citizen.
LICENSING
Export licenses are issues by two different U.S. Government agencies: The Directorate of Defense Trade Controls (DDTC) for ITAR-controlled technologies and the Bureau of Industry and Security (BIS) for EAR-controlled technologies. The time it takes for one of these agencies to review and ultimately approve a license can vary based on what the technology is and its destination. With that in mind, a general rule of thumb is to allow for a minimum of sixty (60) days for this to occur.
The U.S. government maintains strict export controls for national security and foreign policy reasons. As a result, certain countries are extremely difficult, if not impossible, to obtain an export license for, particularly for export-controlled items.
The most difficult countries to obtain an export license from the U.S. are those under comprehensive embargoes and sanctions. These countries are often designated as state sponsors of terrorism or have a policy of denying licenses for most, if not all, transactions. The U.S. government agencies responsible for these controls, primarily the Department of Commerce’s Bureau of Industry and Security (BIS) and the Treasury Department’s Office of Foreign Assets Control (OFAC), have a “policy of denial” for these destinations.
Based on current U.S. export control regulations, the following countries are considered the most difficult to obtain an export license for:
- Cuba
- Iran
- North Korea
Exports to these countries are generally prohibited, and a license is required for almost all transactions, including for items that would not normally need a license. License approvals for these countries can be lengthy, if they are granted at all.
In additional to these comprehensively sanctioned countries, a number of other nations face significant export restrictions due to specific concerns, such as:
- Russia and Belarus: Due to the invasion of Ukraine, the U.S. has imposed stringent export controls on a wide range of items destined for Russia and Belarus, particularly for items on the Commerce Control List (CCL).
- China: The U.S. has increasingly tightened export controls on certain advanced technologies, such as semiconductors and advanced computing, to China, especially for military and intelligence end-users.
- Venezuela: The U.S. has sanctions in place related to the government of Venezuela.
Both the Departments of State and Commerce maintain lists of sanctioned or embargoed countries where exports are specifically restricted or embargoed. A good starting place is the Department of State’s webpage for Country Policies: https://www.pmddtc.state.gov/ddtc_public?id=ddtc_public_portal_country_landing
If exports of controlled technologies are made without a required license, it is a violation of regulations. It is also considered a violation if an export is made without properly proclaiming an export exemption with U.S. Customs. Unauthorized exports to certain countries legally require a disclosure to the proper authorities. For other violations, both the ITAR and the EAR have provisions for submitting a voluntary disclosure.
Voluntary disclosures are a way of formally notifying the U.S. Government that a potential violation may have occurred. Both the DDTC and BIS strongly encourage disclosures as a way to demonstrate a company’s commitment to compliance.
GENERAL
If a person or company appears on a DDTC debarment list, they are generally not allowed to take part—directly or indirectly—in activities regulated by the ITAR. This includes exporting defense articles or technical data or providing defense services that require a license or other DDTC approval. It may also mean that they cannot be part of a DoD supply chain (e.g., a supplier or service provider).
Under ITAR §127.1(d), it is also a violation for someone to knowingly help a debarred party by applying for or using export control documents on their behalf, or by engaging in ITAR-regulated transactions that benefit them, unless DDTC has specifically approved it.
The ITAR spells out the specific consequences of debarment, and Federal Register notices announcing debarments provide additional details. Importantly, debarment under ITAR only applies to defense trade controls—it does not prevent a debarred party from conducting unrelated activities such as banking, real estate, or other commercial transactions outside ITAR’s scope.
The key is to always screen for restricted parties related to all exports in addition to suppliers and customer. If someone appears on a debarment list, do additional research to determine if there are prohibitions against you using them for your project.
Having a technology “called out” on a list is referred to as “enumerated”. The “lists” are the United States Munitions List (“USML”) for the ITAR and the Commerce Control List (“CCL”) for the EAR. The fact that technology is not enumerated on one of the lists does not mean that it is not controlled for export purposes. Some technology not typically enumerated may have enhanced designed features or is considered to be “specially designed” with capabilities that meet or exceed those found on the USML or CCL.
In those cases, review the regulations carefully for potential controls that may require export licensing requirements or related restrictions.
